A Viking wall oven is a built-in oven, single or double, set into a cabinet column or under a counter rather than into a range.
as used by Viking Appliance Repair Edmonds, (206) 210-3547
Oven Viking service · Edmonds
A Viking wall oven is a built-in oven, single or double, set into a cabinet column or under a counter rather than into a range.
as used by Viking Appliance Repair Edmonds, (206) 210-3547
For an Edmonds owner that placement decides the visit: a wall oven is repaired where it is installed, and some faults mean easing it forward in its opening.
| What you notice | Measured first |
|---|---|
| Preheat takes far longer than it used to | Cavity temperature logged from cold beside the display, then each heat source |
| Bake or broil element stays dark | Resistance across the element with the power off, then the supply to it |
| Door still latched long after a self-clean | Whether the cavity has cooled, then the lock motor and its switches |
| Display dark, or a code shown mid-cycle | Power at the oven, then the code read against that control's generation |
A wall oven that is slow, uneven or dark is worked through in the order its faults usually hide: the supply first, then the heat sources, then the sensor, then the control. Each element is metered before it is judged by its glow, because a bake element can light along part of its length and still be failing.
The self-clean lock is checked cold. Its latch engages by itself when a clean is selected and releases only once the cavity has cooled, so a door that is still shut an hour after a clean is diagnosed, never forced.
Element and sensor work share one published band and the control sits in another; the page on bake and broil element repair sets out what moves a job inside its band.
A wall oven in a tall column, a layout found in some remodelled kitchens around the Downtown Edmonds Bowl, may need easing forward to reach its wiring. Mention the cabinet when you book and the visit is planned for it.
What it costs
Each row is parts and labour together for one family of job. Where a repair lands inside its row depends on the exact part and how deep in the appliance it sits, so nothing here is a single headline number.
The $89 diagnostic visit is one flat charge for the trip and the complete fault-finding, and it is credited in full against the repair you approve.
Read a band as a boundary, not a price. The figure for your appliance is worked out at the appliance, written beside the measurement that justifies it and agreed before a panel comes off; the $89 diagnosis is then deducted from it.
Unsure which row fits? Describe the fault on a call to (206) 210-3547 (the line is staffed 24/7) and the likely row is named before a visit is booked.
07In their words
Written up after the invoice and edited only for length. Names are shortened at the customers' request.
4.9 / 5871 reviews
The undercounter unit stopped cooling entirely. Diagnosis was quick and straight — a failed fan motor — but the arrival slipped a couple of hours and nobody rang to tell me. The work itself was clean.
The ice maker filled with water and never dropped a cube. He traced it to a dead mould heater rather than condemning the whole assembly, which was the cheaper of the two outcomes he had warned me about on the phone.
The simmer setting kept dropping the flame out altogether on the left side. A lazy gas valve, not the control board a previous shop wanted to order. Half a morning, and it holds a low flame again.
A call to Viking Appliance Repair Edmonds reaches a person at any hour; the booking page lets you choose a visit window yourself, and a technician rings to confirm the appliance before the day. The diagnosis is a flat $89, deducted from any repair you approve.
Visits 8 am–8 pm daily · line staffed 24/7